What is a Clapton Coil?
The Clapton Coil was one of the first advanced coils to be invented. It involves a coil which has a spiraled wire wrapped around an inner coil.
The name comes from the use of a guitar string (much like Eric Clapton would use) which is used to form the external spiraled wire. There are plenty of videos on youtube with tutorials showing different techniques.
How to build a Clapton Coil?
The technique we use at Wicked Wizard involves a 0.4mm guitar string attached to a drill and 32 gauge wire wrapped around the outside by spinnning the drill. (be careful of flailing wires...take it steady till you get the hang of it)
Once the outer wire is formed you take out the inner guitar string and feed 24 gauge coil wire through the middle.
After this, just form a few coil wraps to give your prefered ohm resistance. Attach to your atomizer and vape away.
There are many more advanced coils now with different variations along the same idea as the Clapton Coil such as 'Twisted Clapton' and 'Fused Clapton'.
Always make sure you test the ohm rating of the coils you build before using them especially on unregulated mechanical mods because if the ohm rating is too low for the battery to cope with you can easily turn your mod into a homemade pipe bomb.